Mô đun:Pagetype

Tài liệu mô đun[xem] [sửa] [lịch sử] [làm mới]

This module is used to detect the page type of a given page. It detects redirect pages automatically and is highly customisable. It can be used on its own or as a meta-module to create other page-type-detection templates. This module can also be accessed using {{pagetype}}.

Syntax

Basic usage

{{#invoke:pagetype|main}}

All parameters

{{#invoke:pagetype|main
| Xpage             = 
| defaultns         = 
| main              = 
| user              = 
| wikisource        = 
| project           = 
| ws                = 
| file              = 
| image             = 
| mediawiki         = 
| template          = 
| help              = 
| category          = 
| portal            = 
| author            = 
| page              = 
| index             = 
| translation       = 
| module            = 
| special           = 
| media             = 
| talk              = 
| redirect          = 
| dab               = 
| na                = 
| other             = 
}}

Basic usage

For simple detection of the page type of the current page, use the default settings:

{{#invoke:pagetype|main}}

That will produce the following results, depending on the page type or the namespace:

Page type / namespace	Output
Redirects (in any namespace)	redirect
Main namespace	article
File namespace	file
Template namespace	template
Category namespace	category
Module namespace	module
Author namespace	author
Other namespaces	Xpage

If the module is used on a talk page, it will detect the page type for the corresponding subject page.

Example

Code	Result
{{#invoke:pagetype|main}}	mô đun

Page parameter

You can use the page parameter to make the module act as though it was called from that page.

{{#invoke:pagetype|main|page=page name}}

Examples

Code	Result
{{#invoke:pagetype|main|page=United Kingdom}}	bài
{{#invoke:pagetype|main|page=UK}}	bài
{{#invoke:pagetype|main|page=Talk:United Kingdom}}	bài
{{#invoke:pagetype|main|page=File:Example.svg}}	tập tin
{{#invoke:pagetype|main|page=Wikisource:Sandbox}}	trang
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt}}	trang

Adding and removing namespaces

It is possible to specify different behaviour for each namespace than that described in the basic usage section. For example, you might want the module to display "user page" for pages in the user namespace, instead of the default "page". To do this, you can use the code |user=yes. This looks up the typical name used for pages in the user namespace, in this case "user page", and uses that text when the module is used with a page in the user namespace. To use this with other namespaces, use the namespace name in lower case as a parameter:

{{#invoke:pagetype|main
| user              = yes
| wikisource        = yes
| project           = yes
| ws                = yes
| mediawiki         = yes
| help              = yes
| portal            = yes
| author            = yes
| translation       = yes
| special           = yes
| media             = yes
}}

You can use any of the following to specify the namespace: "yes", "y", "true" or "1". They can be used in any combination of upper and lower case. (These values are defined by Module:Yesno.)

The default text for these namespaces is as follows:

Page type / namespace	Output
User namespace	user page
Wikipedia namespace	project page
MediaWiki namespace	interface page
Help namespace	help page
Portal namespace	portal
Author namespace	author
Translation	translation page
Special namespace	special page
Media namespace	file

You can use a similar process to remove any of the default namespace values as well. For example, if you use the code |template=no, then the module will display "page" when used on a template page, rather than the default "template".

{{#invoke:pagetype|main
| main     = no
| file     = no
| template = no
| category = no
| module   = no
| author   = no
}}

The following values will all work to remove namespace values: "no", "n", "false" or "0". They can be used in any combination of upper and lower case.

Examples

Code	Result
{{#invoke:pagetype|main|page=Wikisource:Sandbox}}	trang
{{#invoke:pagetype|main|page=Wikisource:Sandbox|wikisource=yes}}	trang dự án
{{#invoke:pagetype|main|page=Talk:United Kingdom}}	bài
{{#invoke:pagetype|main|page=Talk:United Kingdom|talk=y}}	trang thảo luận
{{#invoke:pagetype|main|page=United Kingdom}}	bài
{{#invoke:pagetype|main|page=United Kingdom|main=no}}	trang
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt}}	trang
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt|timedtext=Yes}}	trang

Default namespace sets

As well as adding and removing individual namespaces, it is possible to specify different sets of namespaces by using the |defaultns=. There are four different sets available: all, extended, none and the default set. These sets allow you to specify many namespaces at once, without having to use all of the individual namespace parameters. Namespaces are set according to the following table:

Namespace	Value of |defaultns=				Output
	none	extended	all	Other values
Main	N	Y	Y	Y	article
User	N	Y	Y	N	user page
Wikipedia	N	Y	Y	N	project page
File	N	Y	Y	Y	file
MediaWiki	N	Y	Y	N	interface page
Template	N	Y	Y	Y	template
Help	N	Y	Y	N	help page
Category	N	Y	Y	Y	category
Portal	N	Y	Y	N	portal
Author	N	Y	Y	Y	author
Page	N	Y	Y	N	page
Index	N	N	Y	N	index
Translation	N	N	Y	N	translation
Module	N	Y	Y	Y	module
All talk namespaces	N	N	Y	N	talk page
Special	N	N	Y	N	special page
Media	N	N	Y	N	file

Examples

Code	Result
{{#invoke:pagetype|main|page=United Kingdom}}	bài
{{#invoke:pagetype|main|page=United Kingdom|defaultns=none}}	trang
{{#invoke:pagetype|main|page=Talk:United Kingdom}}	bài
{{#invoke:pagetype|main|page=Talk:United Kingdom|defaultns=all}}	trang thảo luận
{{#invoke:pagetype|main|page=File:Example.svg}}	tập tin
{{#invoke:pagetype|main|page=File:Example.svg|defaultns=none}}	trang
{{#invoke:pagetype|main|page=Wikisource:Sandbox}}	trang
{{#invoke:pagetype|main|page=Wikisource:Sandbox|defaultns=extended}}	trang dự án
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt|defaultns=extended}}	trang
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt|defaultns=all}}	trang

Custom namespace values

It is possible to specify a custom value for any namespace:

{{#invoke:pagetype|main
| main              = custom text
| user              = custom text
| wikisource        = custom text
| project           = custom text
| ws                = custom text
| file              = custom text
| image             = custom text
| mediawiki         = custom text
| template          = custom text
| help              = custom text
| category          = custom text
| portal            = custom text
| author            = custom text
| page              = custom text
| index             = custom text
| translation       = custom text
| module            = custom text
| special           = custom text
| media             = custom text
}}

Examples

Code	Result
{{#invoke:pagetype|main|page=Wikisource:Sandbox}}	trang
{{#invoke:pagetype|main|page=Wikisource:Sandbox|wikisource=custom text}}	custom text
{{#invoke:pagetype|main|page=Talk:United Kingdom}}	bài
{{#invoke:pagetype|main|page=Talk:United Kingdom|talk=custom text}}	custom text
{{#invoke:pagetype|main|page=United Kingdom}}	bài
{{#invoke:pagetype|main|page=United Kingdom|main=custom text}}	custom text
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt}}	trang
{{#invoke:pagetype|main|page=TimedText:Imagine.ogg.en.srt|timedtext=custom text}}	custom text

Talk parameter

Normally, the module will treat talk pages as if they were in the corresponding subject namespace. However, if the talk parameter is set, the module will treat talk pages separately from subject pages. The talk parameter sets values for all talk pages, i.e. pages in the Talk: namespace, pages in the User talk: namespace, pages in the Wikipedia talk: namespace, and so on.

{{#invoke:pagetype|main|talk=yes}}

{{#invoke:pagetype|main|talk=custom text}}

The default value for "talk=yes" is "talk page".

Examples

Code	Result
{{#invoke:pagetype|main|page=Wikisource talk:Sandbox}}	trang
{{#invoke:pagetype|main|page=Wikisource talk:Sandbox|wikisource=yes}}	trang dự án
{{#invoke:pagetype|main|page=Wikisource talk:Sandbox|talk=yes}}	trang thảo luận
{{#invoke:pagetype|main|page=Wikisource talk:Sandbox|wikisource=yes|talk=yes}}	trang thảo luận
{{#invoke:pagetype|main|page=Wikisource talk:Sandbox|talk=custom text}}	custom text
{{#invoke:pagetype|main|page=Wikisource talk:Sandbox|wikisource=yes|talk=custom text}}	custom text

Main namespace classes

For pages in the main namespace, it is possible to add a class value in the first positional parameter:

{{#invoke:pagetype|main|class}}

If the class value matches one of the values in the table below, it will produce an alternative to the default output of article.

Class	Class values	Output
Disambiguation page	disambiguation, disambig, disamb, dab	page
No applicable class	na, n/a	page

You can input the class value in any combination of upper and lower case.

Custom main namespace classes

It is also possible to specify a custom value for the main namespace classes:

{{#invoke:pagetype|main|class|dab=yes|na=yes}}

{{#invoke:pagetype|main|class|dab=custom text|na=custom text}}

This works the same way that it does for the custom namespace page types. Possible parameters are:

• dab: a custom value for disambiguation-class pages. If set to "yes", "y", "true" or "1", this produces "disambiguation page". If set to "no", "n", "false" or "0", no custom value is produced. If set to any other value it produces that text.
• na: a custom value for NA-class pages. It works in the same way as the dab parameter. The default value for "yes" etc. is "page".

Examples

Code	Result
{{#invoke:pagetype|main|page=United Kingdom}}	bài
{{#invoke:pagetype|main|page=United Kingdom|dab}}	trang
{{#invoke:pagetype|main|page=United Kingdom|dab|dab=custom text}}	custom text
{{#invoke:pagetype|main|page=United Kingdom|na}}	trang
{{#invoke:pagetype|main|page=United Kingdom|na|na=custom text}}	custom text

Redirects

By default, the module automatically detects redirects in all namespace. It is not possible to specify redirect behaviour by namespace, but you can turn redirect detection off, or use a custom value for redirect pages.

{{#invoke:pagetype|main|redirect=no}}

{{#invoke:pagetype|main|redirect=custom text}}

Examples

Code	Result
{{#invoke:pagetype|main|page=UK}}	bài
{{#invoke:pagetype|main|page=UK|redirect=no}}	bài
{{#invoke:pagetype|main|page=UK|redirect=custom text}}	bài

Other namespaces

By default, the module produces "page" if used from a namespace that hasn't been specified. This value can be changed with the |other= parameter:

{{#invoke:pagetype|main|other=custom text}}

Examples

Code	Result
{{#invoke:pagetype|main|page=Wikisource:Sandbox}}	trang
{{#invoke:pagetype|main|page=Wikisource:Sandbox|other=custom text}}	custom text
{{#invoke:pagetype|main|page=Wikisource:Sandbox|other=custom text|wikisource=wikisource-space text}}	wikisource-space text

Tài liệu bên trên nhúng từ Mô đun:Pagetype/tài liệu. (sửa | lịch sử)
Biên tập viên có thể thử nghiệm trong các trang chỗ thử (tạo | sao) và mẫu thử (tạo) của mô đun này.
Các trang con của mô đun này.

--------------------------------------------------------------------------------
--                                                                            --
--                                PAGETYPE                                    --
--                                                                            --
--      This is a meta-module intended to replace {{pagetype}} and similar    --
--      templates. It automatically detects namespaces, and allows for a      --
--      great deal of customisation. It can easily be ported to other         --
--      wikis by changing the values in the [[Module:Pagetype/config]].       --
--                                                                            --
--------------------------------------------------------------------------------

-- Load config.
local cfg = mw.loadData('Module:Pagetype/config')

-- Load required modules.
local getArgs = require('Module:Arguments').getArgs
local yesno = require('Module:Yesno')
local nsDetectModule = require('Module:Namespace detect')
local nsDetect = nsDetectModule._main
local getParamMappings = nsDetectModule.getParamMappings
local getPageObject = nsDetectModule.getPageObject

local p = {}

local function shallowCopy(t)
	-- Makes a shallow copy of a table.
	local ret = {}
	for k, v in pairs(t) do
		ret[k] = v
	end
	return ret
end

local function checkPagetypeInput(namespace, val)
	-- Checks to see whether we need the default value for the given namespace,
	-- and if so gets it from the pagetypes table.
	-- The yesno function returns true/false for "yes", "no", etc., and returns
	-- val for other input.
	local ret = yesno(val, val)
	if ret and type(ret) ~= 'string' then
		ret = cfg.pagetypes[namespace]
	end
	return ret
end

local function getPagetypeFromClass(class, param, aliasTable, default)
	-- Gets the pagetype from a class specified from the first positional
	-- parameter.
	param = yesno(param, param)
	if param ~= false then -- No check if specifically disallowed.
		for _, alias in ipairs(aliasTable) do
			if class == alias then
				if type(param) == 'string' then
					return param
				else
					return default
				end
			end
		end
	end
end

local function getNsDetectValue(args)
	-- Builds the arguments to pass to [[Module:Namespace detect]] and returns
	-- the result.

	-- Get the default values.
	local ndArgs = {}
	local defaultns = args[cfg.defaultns]
	if defaultns == cfg.defaultnsAll then
		ndArgs = shallowCopy(cfg.pagetypes)
	else
		local defaultnsArray
		if defaultns == cfg.defaultnsExtended then
			defaultnsArray = cfg.extendedNamespaces
		elseif defaultns == cfg.defaultnsNone then
			defaultnsArray = {}
		else
			defaultnsArray = cfg.defaultNamespaces
		end
		for _, namespace in ipairs(defaultnsArray) do
			ndArgs[namespace] = cfg.pagetypes[namespace]
		end
	end

	--[[
	-- Add custom values passed in from the arguments. These overwrite the
	-- defaults. The possible argument names are fetched from
	-- Module:Namespace detect automatically in case new namespaces are
	-- added. Although we accept namespace aliases as parameters, we only pass
	-- the local namespace name as a parameter to Module:Namespace detect.
	-- This means that the "image" parameter can overwrite defaults for the
	-- File: namespace, which wouldn't work if we passed the parameters through
	-- separately.
	--]]
	local mappings = getParamMappings()
	for ns, paramAliases in pairs(mappings) do
		-- Copy the aliases table, as # doesn't work with tables returned from
		-- mw.loadData.
		paramAliases = shallowCopy(paramAliases)
		local paramName = paramAliases[1]
		-- Iterate backwards along the array so that any values for the local
		-- namespace names overwrite those for namespace aliases.
		for i = #paramAliases, 1, -1 do
			local paramAlias = paramAliases[i]
			local ndArg = checkPagetypeInput(paramAlias, args[paramAlias])
			if ndArg == false then
				-- If any arguments are false, convert them to nil to protect
				-- against breakage by future changes to
				-- [[Module:Namespace detect]].
				ndArgs[paramName] = nil
			elseif ndArg then
				ndArgs[paramName] = ndArg
			end
		end
	end
	-- Check for disambiguation-class and N/A-class pages in mainspace.
	if ndArgs.main then
		local class = args[1]
		if type(class) == 'string' then
			-- Put in lower case so e.g. "Dab" and "dab" will both match.
			class = mw.ustring.lower(class)
		end
		local dab = getPagetypeFromClass(
			class,
			args[cfg.dab],
			cfg.dabAliases,
			cfg.dabDefault
		)
		if dab then
			ndArgs.main = dab
		else
			local na = getPagetypeFromClass(
				class,
				args[cfg.na],
				cfg.naAliases,
				cfg.naDefault
			)
			if na then
				ndArgs.main = na
			end
		end
	end
	-- If there is no talk value specified, use the corresponding subject 
	-- namespace for talk pages.
	if not ndArgs.talk then
		ndArgs.subjectns = true
	end
	-- Add the fallback value. This can also be customised, but it cannot be
	-- disabled.
	local other = args[cfg.other]
	-- We will ignore true/false/nil results from yesno here, but using it
	-- anyway for consistency.
	other = yesno(other, other)
	if type(other) == 'string' then
		ndArgs.other = other
	else
		ndArgs.other = cfg.otherDefault
	end
	-- Allow custom page values.
	ndArgs.page = args.page
	return nsDetect(ndArgs)
end

local function detectRedirects(args)
	local redirect = args[cfg.redirect]
	-- The yesno function returns true/false for "yes", "no", etc., and returns
	-- redirect for other input.
	redirect = yesno(redirect, redirect)
	if redirect == false then
		-- Detect redirects unless they have been explicitly disallowed with
		-- "redirect=no" or similar.
		return
	end
	local pageObject = getPageObject(args.page)
	-- If we are using subject namespaces elsewhere, do so here as well.
	if pageObject
		and not yesno(args.talk, true)
		and args[cfg.defaultns] ~= cfg.defaultnsAll
	then
		pageObject = getPageObject(
			pageObject.subjectNsText .. ':' .. pageObject.text
		)
	end
	-- Allow custom values for redirects.
	if pageObject and pageObject.isRedirect then
		if type(redirect) == 'string' then
			return redirect
		else
			return cfg.redirectDefault
		end
	end
end

function p._main(args)
	local redirect = detectRedirects(args)
	if redirect then
		return redirect
	else
		return getNsDetectValue(args)
	end
end

function p.main(frame)
	local args = getArgs(frame)
	return p._main(args)
end

return p